Description
A Safety Harness of Full Body Harness is designed to protect a person from injury if involved in an accident when working at height by absorbing impact forces that occur during a fall and holding the person in suspension.
PRODUCT DESCRIPTION
Ridgegear RGH2 Two Point Safety Harness with Fast-Fit Connectors.
Declaration of Conformity to EN361:2002
Weight : 1.3 kg.
Material : 45mm RIDGE Protect anti-bacterial polyester
Fittings : High tensile steel alloy
Max. user weight : 140kg. (when the maximum force on the user / ancjor is limited to <6kN).
Additional Features
Fast-fit fasteners for faster donning and removal.
WEAR YOUR HARNESS CORRECTLY
A correctly fitting safety harness will protect it’s wearer from preventable injuries and improve productivity by removing harmful practise and safety risks.
An uncomfortable Safety Harness will distract its wearer because it can annoy them and reduce their trust in it. Those wearing a properly fitting harness are more likely to wear them as the manufacturer intended benefitting from maximum protection.
Safety Harnesses are designed to keep workers connected to their Lanyards or Fall Arrestors and positioned upright if a fall occurs. If a harness is ill-fitting or worn incorrectly, the straps may be too tight or move into the wrong place after a fall. It may also cause injuries during or after the fall, complicating rescue efforts.
A properly fitting harness will give your worker more control over their position and movement, giving you more time to reach them before their health suffers.
PRE-USE INSPECTION- SAFETY HARNESSES
Safety harnesses should be inspected before each use to ensure they are in good condition and safe to use. Additionally, they should undergo a thorough inspection by a competent person at least every twelve months, or more frequently if subjected to heavy use or harsh conditions.
Click this link to a short demonstration movie
https://youtu.be/Azgb79PY_pM?si=l05ief8nf6z3_vf2
